Travertine Marble is a form of limestone deposited by mineral springs, especially hot springs. Travertine often has a fibrous or concentric appearance and exists in white, tan, cream-colored, and even rusty varieties. It is formed by a process of rapid precipitation of calcium carbonate, often at the mouth of a hot spring or in a limestone cave. In the latter, it can form stalactites, stalagmites, and other speleothems. It is frequently used in Italy and elsewhere as a building material.
Travertine is a terrestrial sedimentary rock, formed by the precipitation of carbonate minerals from solution in ground and surface waters, and/or geothermal heated hot-springs. Similar (but softer and extremely porous) deposits formed from ambient-temperature water are known as tufa.
Travertine is an especially attractive form of limestone that forms around mineral spring deposits. Its fibrous, marble-like texture and attractive earth-tone colors make it one of the most popular stones used for building materials. Historically, much of the travertine used in architecture and artwork came from the mountains of Italy, but today, most of the travertine sold is from Turkey, Iran, Mexico, and Peru.
As a flooring material, travertine is typically sold in tile form and comes in a variety of earth tone colors, including tans, browns, rust, and beige hues. It is a very durable stone, and while it is easier to care for than some types of natural stone, travertine is very heavy, and its piousness requires that you seal the surface regularly. It is not appropriate for all locations. But a properly installed and cared for travertine floor can add a unique blend of mountain-born beauty to interior spaces.
Travertine Flooring Costs
Travertine is a mid-range stone in terms of cost, but this puts it at the high-end in the entire range of flooring materials. A travertine floor averages about $15 per square foot for materials plus labor.
Marble, by comparison, averages around $20 per square foot, and granite averages around $12 per square foot. Laminate flooring, at the low end of all flooring materials, can be professionally installed for less than $5 per square foot. Like other natural stone, though, travertine flooring can vary substantially in price—from as low as $3 to as high as $30 per square foot, depending on the quality and finish of the stone.
Finishes can range from a natural texture (the least expensive) to a honed, polished and sealed surface (the priciest).
Maintenance and Repair
Maintaining travertine is paradoxically both complicated and simple. Like other natural stone, travertine has microscopic pores that can allow spilled liquids and staining agents to penetrate. This problem can be prevented by applying a penetrating sealer, followed by a barrier surface sealer. This dual treatment needs to be applied during installation, and then periodically reapplied throughout the life of the floor.
If you want to maintain a glossy surface, more regular resealing will be necessary. But if it is kept properly sealed, travertine is quite simple to clean, requiring only simple damp mopping with a mild soap solution.
Hard tile materials such as travertine are made to take a beating without showing significant damage from scratches, cracks, or chips. Over time, a weathering effect can occur, which is often prized for giving the floor a distinct character that evokes ancient architecture. This antique patina is one of the main allures of travertine.
With polished and honed materials, there is a greater risk of scratching, while natural-finish tiles are more resistant to damage and blemishes. Since travertine flooring is laid in tiles, individual pieces can be removed and replaced if they crack. This involves carefully breaking up and removing the damaged tile, scraping the subfloor, then installing a new tile with thin-set adhesive, and grouting the joints. If the surrounding floor has weathered, however, the patched area may not match exactly for some time.
Travertine Marble is one of the oldest building materials in existence, and a floor made with travertine adds a sense of age and prestige to the home. At the same time, it has inherently dominant energy that draws attention in a subtle, subdued way, with mild tones found swirling in its hazy, shifting surface effects. Each piece is also a nature-formed work of earth art, creating a one-of-a-kind installation.
Thanks to its soft palette of colors, travertine maintains a reserved dignity that is much more subtle than granite or marble. Available in tans and beiges, grays, and speckled off-white hues, these tiles can bring the towering dominance of earth to a flooring installation without overwhelming a room with dramatic colors.
Travertine Flooring Installation
Like other stone tiles, travertine Marble flooring is installed in much the same way as ceramic tile. A layer of cement board underlayment is applied over the subfloor, then the stone tiles are laid with thin-set adhesive, and finally, the joints are filled with grout. Grouting can be tricky with travertine if the tiles have not been sealed since the grout can stain the material. When using unsealed tiles, it’s best to apply a sealer before grouting.
While the installation techniques are similar to those for ceramic tile, travertine poses some unique difficulties. Because this travertine marble material is very heavy, the floor structure must be strong and stiff enough to support the flooring without excessive bowing or flexing. Structural reinforcement is sometimes necessary.
Travertine is a very hard stone, and ordinary tile-cutting tools are not sufficient to cut it. Instead, a power wet saw equipped with a diamond blade is used. Because of these difficulties, installing travertine is not a popular DIY project; the work is usually left to professionals.
If you’re installing a new floor, be sure to keep a few extra tiles so you can make perfectly color-matched repairs in the future;
Top Brands of Travertine Marble Flooring
Travertine flooring tiles can be purchased at just about any tile shop and even most home improvement centers. This is not a product that depends on manufacturing brand, since the wholesalers that supply retail outlets buy their stone from the same quarries. More important is the classification of the travertine:
- Polished: In this classification, the tiles are very glossy, since the stone has been polished for maximum smoothness and completely sealed;
- Honed: This class of travertine has been filled and lightly polished; but it still has a matte-like finish and is less slick and slippery than polished stone. This is the most popular stone for indoor floor use.
- Brushed: Brushed travertine has textured by treatment with wire brushes to give the stone a matte surface.
- Tumbled: Tumbled travertine has rounded corners and edges, with an aged, antique look. It provides good traction underfoot but will need to be sealed against stains. It has a beautiful antique look but isn’t very practical for heavy-use floors.
Comfort and Convenience
Like most solid-stone materials, travertine marble flooring tends to retain its temperature;—it will be cold in winter and retain summer heat well into the evening. On chilly mornings the floor can be uncomfortably cold on bare feet. You can minimize this problem with area rugs placed in strategic positions. On the flip side, a travertine tile is a good option for flooring over radiant (in-floor) heating systems. Once the tile heats up, it is an excellent conductor that will gently heat up a room.
Travertine vs. Porcelain Tiles
There are now many porcelain tiles that do a good job of mimicking natural stone, including travertine. Porcelain tiles are quite hard and durable, and much more DIY-friendly than natural stone.
While the appearance of travertine-porcelain is not exactly like natural stone; it can be remarkably close to the look of polished or honed ;travertine, especially when installed by someone who takes pains to;carefully arrange the patterns randomly. Stone-look porcelain tiles are also less expensive, averaging $7 to $10 per square foot for professional; installation—or half that, if you are installing it yourself.
Is Travertine Marble Flooring Right for You?
Travertine floor tile is a premium natural stone material that is well suited; if you have an ample budget and want the antique elegance that this natural stone lends. But if you aren’t willing to reseal the floor periodically, or if the lofty price puts you off; a stone-look porcelain tile is worth considering as an alternative.
This Natural Stone has been used since time immemorial in the construction of public buildings. Palaces, basilicas, temples… all were embellished with this sedimentary limestone formed by calcium carbonate deposits.
Considered ever since a decorative product of the first order, its virtues are manifold: not only does it offer important compositional qualities that allow it to be worked with ease and give it a great deal of strength; it also possesses spectacular beauty. Its irregular surface scored with small hollows presents an infinite variety of patterns,; bright and whimsical veins and a kaleidoscopic, changeable coloration filled with subtleties.
Travertine reinvents itself to adapt to the new constructional and ;architectural concepts demanded by our times the material integrates fully into contemporary interior decors. Levantina offers a range of the highest quality, one suited to this new functional and aesthetic reality.
Shree Ram Expo – Travertine
By Ankit Singhal, MD, Shree Ram Expo
Contact us: firstname.lastname@example.org
+91- 95715 10000